Replacement Double Glazing Window Handles
If a double-glazed window handle breaks, it is crucial to replace it, ensuring safety and functionality.
uPVC handles are operated by a spindle that runs through the middle of the handle into the lock mechanism inside the window frame.
You'll have to be aware of the step height for your uPVC handle. This is determined by looking for screw cover caps on the inside face of the handle.
Tilt & Turn
In Europe, tilt and turn windows have been a common choice. However they are just getting more popular in the UK. These windows are a popular option for renovations and new construction due to their advanced functionality. They are easy to open or close to let light and air to enter your home.
They also have greater airtightness compared to other window types because of the locking points on the sash as well as the rubber seal that runs across the entire perimeter of the frame. Unlike uPVC casement windows, tilt and turn windows can be opened from both the top and bottom and allow you to clean the outside of the windows without having to leave your home.
If door handles are replacing a tilt and turn window handle it is important to consider the step height of your handle. This is the distance from the bottom of the handle to the point where it is attached to the window frame. This is crucial as your window won't be able open properly if you don't get it right.
Standard step heights for UPVC and tilt-and-turn windows made of aluminium are 21mm. To ensure that your new handle fits the window, ensure it is the same height.
Another factor to bear in mind when selecting a tilt and turn replacement window handle is the type of operation it comes with. Some handles have a lever that is down when locked, up at 90 degrees to tilt and straight up to open. This is known as a "tilt-before-turn" (TBT), safe handle. You should make use of it when children are present in your home.
A spindle is normally found on the handle of most tilt and turn windows. This spindle can be adjusted in different positions, similar to a door lock. The length of the spindle is also different. Some have a longer spindle that can be adjusted using the screwdriver. Some have a shorter shaft that can only be adjusted by loosening the small screw at the base of the handle.
Casement
Casement windows are a huge hit due to a variety of reasons. Its simple design makes it simple to install, and it offers great energy efficiency and noise reduction. However, there are typical issues with windows that homeowners need to be aware of. If the handle on your casement breaks, you may find it difficult to open the windows.
Fortunately, there are easy steps you can take to replace your window handle and make it work again. Follow these steps regardless of whether your casement window was put in place recently or is old.
It is essential to fix your uPVC window as soon as you can. This will keep your home secure and deter burglars. You can choose from a range of window handles, such as Espag handles and cockspur handles. But, it is essential to select a handle that is suitable for your window. If you're having difficulty opening your window, it is likely that the handle's spindle in the handle has worn away.
There are a few crucial things to think about when replacing the handles on your uPVC window casement. Included in this are the handle size, screw centres, and spindle size. Think about the type of lock and the color. This is because the mechanism that locks your window will depend on the kind of handle you choose.
Espag handles are found on uPVC window frames in the present. These handles control your uPVC window's multipoint espagnolette lock. They are available in a range of colors and come in locking or non-locking versions. They also come in left and right opening options.
Cockspur handles can still be found on older uPVC double-glazed windows, but are not used anymore. The aluminium counterpart comes with a lower step height. They typically measure 21mm while the aluminum version is 9mm.
You could also use blade or spade handles to replace handles for double-glazed windows. These handles are similar in design to cockspur handles however they have a smaller spindle. They are often used on older wooden frame double-glazed windows, however they can also be found on uPVC cottage windows.
Sash
If you have an old sash window you may have to replace the handles. This is because windows of this type typically come with a system that comprises the counterweight, sash cord pulley, and rails that allow the sash to move up and down easily. The sash's movement blocks moisture from entering the frame, which can cause wood rot and mould. It also permits you to open the windows to let in fresh oxygen.
To ensure that you have the correct handle for your sash windows, you'll have to know the dimensions of the window's spindle. It is determined by measuring the distance between the base of the handle and the frame. It is also important to consider the window's hand, i.e. whether the handle opens clockwise (right-handed) or clockwise (left-handed).
Once you've selected the right sash handles for your window, it's now time to determine if you'll need a tilt latch. A tilt latch is utilized to keep the window upright and can be put in on single or double-glazed windows. There are three types of tilt latches: internal, slide-in and surface mounted.
You can also install a sashlock on your sash windows to improve security. This will stop burglars from forcing your window open.
There are many different styles of sash handles that you can pick from. Espag handles are the most popular for uPVC Windows. They are typically slim and round, with a locking mechanism, however, there are also monkey tail and cockspur handle styles. They are better suited for older windows, and also have a more of a decorative appearance. However, they can also be found on casement windows.
Vertical Sliding
Vertical sliding windows are the ideal option for smaller spaces. While horizontal sliding windows are popular for large openings, they are also suitable for larger openings. These windows are easy to clean and offer great ventilation. They are also more cost-effective since they don't require any maintenance. They could be damaged in the event that you accidentally move the windows. It is crucial that these windows are installed in a spot that pets and children cannot reach them.
Vertical sliding windows can be opened by a movement of left or right within a single frame. They are typically operated with a spiral balance comprised of a strip of metal that extends from one side of the window, and is then twisted into a coil. When the window is lower it is lowered until the hidden end of the spiral rotates and allows the sash to rise and closed.
The most commonly used type of vertical sliding window is made of real wood and gives your home a classic appearance. If you prefer a modern style, PVC-U can be found in a range of colors and finishes to fit your preferences. Some manufacturers provide a woodgrain appearance for a more authentic appearance.
Vertical sliding windows are easier to open than double-hung windows in some situations. They are also less prone to water damage than their wooden counterparts, making them an excellent option for homes with young children or seniors.
Certain homeowners put security features to their new sliding windows to keep unwanted guests away from the house. To accomplish this, you can insert a scrap piece of wood into the lower sash. You can then secure it onto the frame to keep it from opening completely. Consider adding a sliding bolt keyed lock to the frame if want a more sophisticated option. This will ensure that your windows are safe, and your family members will be able to access them in the event of an emergency.